top of page

Custom overmolded connectors and cable splitters

Overmolded splitter with three cable branches and circular connectors

When the catalog part doesn't exist, we build it. Y-splitters, cable junctions and inline components, overmolded to your design, from the first prototype to production runs. No minimum order.

Overmolded splitter with three cable branches and circular connectors

0

MINIMUM ORDER QUANTITY

48H

PROTO 

LEAD TIME

100%

CANADIAN PRODUCTION

3D

PRINTED MOLDS, MADE IN-HOUSE

01

ASSEMBLY AND SOLDERING

Cable preparation, then soldering of the branches, boards and connectors to a controlled assembly drawing.

02

LOW-PRESSURE OVERMOLDING

One shot or several. A first shot can lock the board and wires in position before the outer body is molded.

03

ELECTRICAL TESTING

Between shots when the design calls for it, so a fault is caught while it can still be fixed.

04

PRODUCTION AND REPEAT ORDERS

Your mold stays in our shop, stored and maintained, ready for the next run.

What you can add to a cable

A cable rarely stays a simple cable. Somewhere along its length, your design needs a second branch, a board, a button or a light. We assemble it, then seal it in a single overmolded body.

Custom overmolded connectors

M8, M12 and push-pull circular connectors, straight or at 90°, on round or flat cable. We work with the connectors you have already selected and qualified.

Y-splitters and cable junctions

One cable in, two or more out. Y-blocks, breakouts and multi-branch junctions, with each exit sealed around its own cable diameter.

Inline PCB

Your board, soldered mid-cable and sealed in an overmolded PCB adapter. Low injection pressure (1.5 to 20 bar) protects the solder joints and the circuit.

Inline switches and push buttons

A custom overmolded inline switch or push button, placed where the operator's hand is, with no separate enclosure to design.

Indicator LEDs

Status LEDs sealed in the overmold, with a transparent resin where the light needs to show.

FREQUENTLY ASKED QUESTIONS

The questions we're asked most often

  • Yes. Most projects start with connectors, cables and boards the customer has already chosen and qualified. We design the mold around them.

  • No. The same mold serves your first prototype and your production runs.

  • Yes. Send us the board or the switch reference and we design an overmolded PCB adapter or switch body around it. For the boards themselves, we work with partners for PCB manufacturing.

  • They describe the same idea: one cable divided into several branches. The name changes from one industry to the next. We build them all the same way: assembled, then overmolded.

  • The seal is tailored to the geometry of your part and to the resin chosen. A well-designed overmold typically achieves IP67 or IP68. Tell us the rating you are aiming for and we design the overmold and the cable exits for it.

  • We 3D-print our molds in-house, so tooling takes days rather than weeks and costs far less than machined tooling. A first prototype is ready in 48 hours.

Overmolded I/O module on flat cable with a right-angle M8 connector
Overmolded I/O module on flat cable with a right-angle M8 connector
Electronics Technician

WHY FILLIO?

Molds designed in Canada
for your parts.

✓

Rapid prototyping — results in 48 hours

✓

No minimum order quantity

✓

Molds designed and manufactured locally

✓

A team available to assist you from concept to delivery

✓

Guaranteed certification and traceability

Electronics Technician
bottom of page